3 Part Heavy Duty System for Non Skid Coating and Epoxy Indoor Use Only

How to apply after cleaning concrete and allowing to dry thoroughly.

1. Apply epoxy primer part# PC-211
2. Broadcast silica sand (not provided)
3. After- Min. Recoat Time: 4-6 hours @ 75°F Apply a second coat of epoxy primer

• Option -If outdoor or heavy traffic areas, use instead part# IPI-CT352-PC211 made for heavier uses and extra UV protection

Interstate DIY Epoxy Coating - 1 Gallon Kit Covers 220 Square Feet

Interstate Products DIY epoxy coating is a two component, solvent based epoxy coating for concrete. PC-211 is designed to be used as a primer or finish coat. PC-211 provides excellent resistance to a wide range of industrial chemicals

PRODUCT USES:
Recommended as a finish coat on concrete floors in warehouses, tank pads, production areas, garages, and shop floors. Recommended as a primer under epoxies, polyurethanes and polyaspartics.

PRODUCT FEATURES:
• Good chemical, abrasion, and impact resistance.
• USDA Approvable.
• Outstanding adhesion and “wetting out” properties.
• Available in wide range of colors.
• Very low permeability-tight sealed film.
• Self-priming on concrete and steel.
• Used as a primer and/or finish coat.

DIY Epoxy Coating Specifications:
Finish: Gloss
Volume Solids: 55%
V.O.C.: 390 GMS/L
Recommended Dry Film Thickness: 3-4 mils DFT @ 220-290 sq. ft. per gal.
Mixing Ratio: 1:1 by volume. Mix 1 parts Base (Part A) to 1 part Hardener (Part B)
Induction Time: 15 min.
Pot Life: 4-5 hrs. @ 75°F
Application: Spray, Brush or Roller
Application Temp: 45° – 120°F
Min. Recoat Time: 4-6 hours @ 75°F