Non-Slip Coating - BARE FEET - Traction-N-More Epoxy Master Kit

Bare Feet Epoxy Non Slip Coating

Bare Feet Non-Slip Coating - Traction-N-More Epoxy Master Kit - For the strongest possible bond, use our DIY kit packed up in a 6 gallon mixing pail containing a powerful combination of epoxy resin, hardener and aggregate for long-lasting slip resistance. Ideal for concrete surfaces or short term application on steel but not suitable to apply on fiberglass or tile. A low pedestrian grade version of our original heavy duty Traction and More anti slip coating kit. This version is  for barefoot, agricultural, livestock or other applications where a less coarse aggregate is desired. See label for more uses.  A 6 gallon pail containing epoxy resin, hardener and aggregate for the strongest possible bond and skid proofing on concrete, metal, fiberglass and more (just not tile).


To apply Anti Slip Kit : Simply clean surface, mix up 2 part epoxy non slip paint, roll down, broadcast the aggregate over it in a uniform fashion and let it dry 24 hours for foot traffic and 48 hours for vehicular. This 100% Epoxy Anti Slip coating Kit can be used to help prevent accidents on livestock areas, barns, kennels, porches, decks, sidewalks, ramps, trucks, production areas, driveways, basement floors, bricks and stones, steps and more. Excellent for use on floor areas which are subjected to bare feet, animals, abrasive traffic, impact and/or corrosive spillage. Easy to apply, yet tough enough to stand up to heavy vehicular traffic - even fork lift trucks.

This permanent non skid coating with its powerful industrial sand paper with a low profile aggregate like finish that saves down time by reducing slippery areas in any work environment even if wet or covered in liquids. (Epoxy Anti Slip Coatings are Available in a variety of colors as well as custom matched floor colors as close as possible.) Low odor and easy to clean for use indoors and outdoors on sidewalks, decks, walkways, floors, concrete, steel/metal ramps, equipment and much more. ***Just a note-Please make sure "you want it where you apply it" as it is extremely difficult to remove once it dries.

• One Master Kit Covers Up To 600 Square Feet Depending on the Porosity of the Surface Being Treated.
• Available in Standard and Custom Colors

Easy To Apply:
Start with a clean, dry surface. Mix up the 2 part (Part A, Part B) anti slip paint in its entirety. Use a paddle attachment on a corded drill and mix for 5 minutes or better, let stand 20-30 minutes and roll onto surface. (Medium knap roller recommended) The aggregate can then be broadcast over the freshly painted area.

Cure Time:
This will vary on temperature and relative humidity. 24 Hours for Foot Traffic. 48 Hours for Vehicular Traffic.
Ensure you're applying your product in just the right spot. Our adhesive is strong and reliable, but can be a real challenge to get off if it's not where you want it!

NOT FOR SALE IN CALIFORNIA

Read More