Drum Dumper - Morse Heavy Duty Kontrol-Karrier - 3 Piece Drum Holder - Morse Heavy Duty Drum Handling System
Morse Model 185G-HD below-hook drum carrier allows you to lift, move and pour a drum weighing up to 1500 Lbs., or a half-full* drum up to 800 Lbs. The 3-piece drum holder is designed to securely hold a 55 gallon drum with 22.5" outside diameter between the ribs. The 185G-HD is a 3 piece heavy duty drum holder that has an 8" wide metal band that is hinged in two places and has a front closure to secure the drum. It replaces the cinch chain and ratchet tightner.
To load the drum lifter, simply move the drum holder against the drum and cinch the chain. Lift the drum and rotate drum 360 degrees in either direction. Drum can be held at any tilt angle. The standard drum tilt control is a chain wheel with 12' chain loop.
The slots in the bottom of the frame can be used as a chain lock to prevent the drum from tilting. To do so, crisscross the chain and insert one side into each slot. If the drum handler is equipped with the MORStop Tilt-Brake Option, braking is immediate and automatic. To have MORStop Tilt-Brake Option installed on your new Kontrol-Karrier, order Option # 3900i-P.
Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
• All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
Morse 185G-HD Heavy Duty Drum Carrier Specifications:
Capacity: 1500 lbs.
Weight: 118 lbs.
Fits Drum Size: 22.5" Diameter Ribbed 55 Gallon Steel Drum
*Half-Full Drum Rating
Half-full drum rating for below-hook drum carrier is an indication of capacity for tilting unbalanced, bottom heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.