Justrite Rigid Lock QuickBerm - 20' x 20' x 12" - 28532
- Berms : JR-28532
- This Item Ships FREE
- Spill Berm Size:
- 20' x 20' x 12"
- Berm Containment:
- 2501 - 5000 Gallons
- Spill Berm Type:
- Rigid Lock QuickBerm
- Watch Now
- Chemical Compatability:
- Berm Width:
- Berm Length:
- Wall Height:
- Length Range:
- Width Range:
- Containment Capacity:
- 2,990 Gallons
- Normally Ships in 2-3 Days
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 3 or above||and get 2% off|
Justrite Rigid Lock QuickBerm®
Safe, drive-in spill containment for drums, IBC totes, and tanks.
• Single-piece construction - patented Rigid-Lock wall support system integral to berm provides unobstructed work space
• Quick and easy setup - NO ASSEMBLY REQUIRED.
• Durable modified PVC coated fabric withstands long term UV exposure - great for outdoor use.
The Rigid-Lock QuickBerms ergonomic design provides 100% inside berm accessibility with an unobstructed side-to-side floor space for vehicle tires, foot traffic, and cleaning. The patented Rigid-Lock wall-support design protects personnel against trips and falls when walking along the outside perimeter. Built-in stainless steel wall supports lock the sidewalls in a 12-in (305-mm) high, 90° vertical position. The Rigid-Lock QuickBerm® offers immediate, secure deployment and no-worry, spill-readiness.
Like the QuickBerm® Plus the standard QuickBerm® withstands a broad range of chemicals including petroleum, oils, grease, and most acids—durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCorner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping, or sagging of the corners during full containment for fluid-tight reliability. Walls include a 1-in (25-mm) fray-resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy-duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive-in and out. Portable design folds down quickly for storage and transport.
The built-in Rigid-Lock wall supports maximize usable space inside the berm and greatly reduce any tripping hazard on the berm perimeter. The device only folds down one way, inward towards the inside of the berm. The one-piece design folds down flat and remains integral to the sidewall. Supports resist extreme temperatures (-50F to 160F). When in the down position, they can withstand vehicle weights in excess of 11,000 lbs (5,000 kg) at each tire. While in the up position, the supports will hold up to wind loads of 40 miles per hour. Additionally, Rigid-Lock supports will perform at full rim containment height—meaning the berm is entirely full—without bend or buckles. In case of damage, for example a user drives out of the berm without lowering the wall to the proper exit position, the stainless steel support rods are replaceable.
Helps comply with EPA for containment and spill prevention (SPCC).
IPI is a leading provider of berms for 2+ decades, we are confident in our ability to provide you with high performance products and services. We have earned a 4.8 overall satisfaction rating on over 3500 reviews, with over 3000 5-star reviews from third-party sources - we are proud to stand by these ratings and the work that we do.